EasyReflective™ Heat Transfer Vinyl by Siser

EasyReflective is Siser’s only reflective material with a pressure sensitive backing! This highly reflective heat transfer vinyl is constructed with glass bead technology to illuminate the darkest of conditions. EasyReflective is a truly exceptional polyurethane product due to its pressure sensitive carrier that allows you to re-stick lifting material or replace a piece that’s accidentally removed. With a low application temperature and simple warm peel, EasyReflective can be applied to all kinds of garments and accessories that need to stand out in low lighting. Heat apply EasyReflective with a heat press or home iron for increased visibility on sports garments, pet clothes, or construction crew uniforms.

Cut Settings:

Cricut: • Blade: Standard • Setting: Iron-on

Silhouette Cameo: • Blade: Standard, 3 • Setting: Heat Transfer Material (Smooth) • Speed: 8 • Thickness: 6

Brother: • Blade: 2 • Cut Speed: 1 • Cut Pressure: 1

Roland GX-24: • Blade: 45° • Force: 80g-90g • Speed: 25-50 cm/s

Application Instructions:

Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier warm

Application Instructions (heat press) • Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use light/medium pressure for 15 seconds • Peel carrier warm (at least 15 seconds off press)