Description

Brick™ 600 Heat Transfer Vinyl

Siser Brick 600 is a 600 micron thick, flexible heat transfer vinyl that’s designed for smaller logos and designs to add extra dimension to your garments. Brick 600’s semi-gloss finish looks great on caps, bags, and is ideal for left chest logos.

Brick is CPSIA Certified, so it’s perfect for decorating children’s clothing and accessories.

Application Instructions

Iron:
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold

Heat Press:
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use light/medium pressure for 10-15 seconds
• Peel carrier hot or cold

Cut Settings

Cricut:

• Blade: Standard
• Setting: Cardstock Light +

Silhouette Cameo:

• Blade: Standard, 10
• Setting: Heat Transfer Material (Flocked)
• Speed: 4
• Thickness: 33

Brother:

• Blade: 2
• Cut Speed: 1
• Cut Pressure: 2

Roland GX-24:

• Blade: 45°
• Force: 150g-190g
• Speed: 30 cm/s

Color	Black, Green, Navy Blue, Red, Royal Blue, White, Yellow, Fluorescent Blue, Fluorescent Green, Fluorescent Orange, Fluorescent Pink, Fluorescent Yellow